This issue might be only useful for people living in Germany. My internet provider is UnityMedia and for some time now users are able to use the router they want and do not have to rely on the on by UM – a hard to work with Technicolor router. I had my problems with the router as well:
- It has 2,4 and 5 Ghz support but not in dual mode
- Port Forwarding is a real hassle
- It looses connection without any apparent reason
So it has plenty of reasons to switch to another one. I always liked the ones by Fritz! and so I looked into buying the 6490 cable version. But it is 250 € new and 110-150€ used. So a scrimper as I am I bought a used one on a german “craigs list” and got it for incredible 50€.
But then I discovered that it is difficult to reuse a device that somebody else already registered with UM. BUT – for me it worked. I had to convince the person in the service hotline to try it anyway and surprisingly for her it worked! I cannot promise anything for people buying used ones as well – but there is hope.
Then there came the down
Ok so I got the router, registered it with UM, changed some settings and then: I had the glorious idea to try to remove the KDG branding that was on it by logging into the Adam2 FTP account and change the
firmware_version env to the avm firmware. But careful: Since there apparently no avm firmware available on the device it will get stuck into a bootloop.
The solution: So what this post is actually about! I tried hard to get back onto the box and try to change it back
- Regular FTP did not work
- Safety Access IP via 188.8.131.52 did not work
- Safety Access IP via 192.168.178.254 did not work
But, if you have the same problem, try using the firmware recovery of the Fritzbox 7390. This will of course not be able to recover anything but it will lead you with an IP that you can use to access the system again. Just FTP to the IP the recovery tool gives you.